IS 350 V6-3.5L (2GR-FSE) (2006)
29. REMOVE NO. 1 FUEL DELIVERY PIPE
a. Disconnect the 2 wire harness clamps and fuel pressure sensor connector.
b. Remove the 2 bolts and 2 nuts.
c. With the connectors still connected, disconnect the No. 1 fuel delivery pipe.
NOTE:
-
Be extremely careful not to touch or strike the tips of the injectors.
-
Pull and remove the fuel pipe in a straight line without tilting it.
d. Disconnect the 3 injector connectors.
e. Remove the 3 injector vibration insulators from the cylinder head.
30. REMOVE FUEL INJECTOR ASSEMBLY
a. Secure the delivery pipe in a vise between aluminum plates and pull out the injector in a straight line.
NOTE:
-
Pull and remove the injector in a straight line to avoid damage to the seal surface of the delivery pipe's O-ring.
-
For reinstallation, attach a tag or label to the injector shaft.
b. Remove the nozzle holder clamps from the injectors.