IS 350 V6-3.5L (2GR-FSE) (2006)
f.
Install a new injector seal to the injector groove (injector tip side) as shown in the illustration.
SST 09260-39015 (09268-03010, 09268-03020)
g. Check that the seal covers the circumference of the injector groove as shown in the illustration.
SST 09260-39015 (09268-03010, 09268-03020)
NOTE: Make sure that the seal does not slip into the welded groove of the injector shown in the illustration. If it does, replace it with a new
one.