IS 350 V6-3.5L (2GR-FSE) (2006)
Fuel Injector: Testing and Inspection
Fuel Injector (For Port Injection)
INSPECTION
1. INSPECT FUEL INJECTOR ASSEMBLY
a. Inspect injector resistance.
1. Using an ohmmeter, measure the resistance between the terminals.
Standard resistance:
11.6 to 12.4 ohms at 20 degrees C (68 degrees F)
If the resistance is not as specified, replace the injector.
b. Inspect the injection volume.
CAUTION: This test involves high-pressure fuel and electricity. Take all precautions regarding safe handling of both the fuel and the
electricity. Perform this test in a safe area, and avoid any sparks or flames. Do not smoke.
c. Remove the fuel pipe clamp.
d. Disconnect the fuel tube.