IS 350 V6-3.5L (2GR-FSE) (2006)
/Page-1050003.png)
19. INSTALL FRONT UPPER FENDER PROTECTOR LH
20. INSTALL FRONT UPPER FENDER PROTECTOR RH
HINT: Installation procedure of the RH side is the same as that of the LH side.
21. INSTALL V-BANK COVER SUB-ASSEMBLY
22. INSTALL ENGINE ROOM SIDE COVER LH
23. INSTALL ENGINE ROOM SIDE COVER RH
24. INSTALL COOL AIR INTAKE DUCT SEAL
25. CHECK FUNCTION OF THROTTLE WITH MOTOR BODY ASSEMBLY
26. PERFORM INITIALIZATION
a. Perform initialization, See: Computers and Control Systems/Testing and Inspection/Programming and Relearning.
HINT: Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.
