IS 350 V6-3.5L (2GR-FSE) (2006)
When a "Normal" code is output during a DTC check but the problem still occurs, use the Problem Symptoms Table. The suspected areas (circuits or
parts) for each problem symptoms are in the table. The suspected areas are listed in order of probability. A description of each of the chart's columns are
as mentioned.
HINT: In some cases, the problem is not detected by the diagnostic system even though a problem symptom occurs. It is possible that the problem is
occurring outside the detection range of the diagnostic system, or that the problem occurs in a completely different system.
Symptom Confirmation and Diagnostic Trouble Codes
SYMPTOM CONFIRMATION AND DIAGNOSTIC TROUBLE CODE