IS 350 V6-3.5L (2GR-FSE) (2006)
/Page-733001.png)
Oxygen Sensor: Testing and Inspection
Heated Oxygen Sensor (For Sensor 2)
ON-VEHICLE INSPECTION
INSPECT HEATED OXYGEN SENSOR
a. Disconnect the sensor connector.
b. Measure the heater resistance between terminals 1 (HT) and 2 (+B) of the sensor.
Standard resistance:
5 to 10 Ohms at 20 degrees C (68 degrees F)
If the result is not as specified, replace the sensor.
