IS 350 V6-3.5L (2GR-FSE) (2006)
a) Install the park/neutral position switch to the automatic transmission.
b) Temporarily install the bolt.
c) Install anew lock washer and the nut.
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
d) Temporarily install the control shaft lever.
e) Turn the control shaft lever counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.
f) Remove the transmission control shaft lever.
g) Align the neutral alignment mark line with the switch groove, and tighten the adjusting bolt.
Torque: 13 Nm (133 kgf-cm, 9 ft. lbs.)