IS 350 V6-3.5L (2GR-FSE) (2006)
Air Bag: Service and Repair
Removal and Installation
REMOVAL
1. PRECAUTION CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting cable to prevent the airbag deployment.
3. REMOVE LOWER NO. 3 STEERING WHEEL COVER
a. Using a screwdriver, remove the steering wheel No. 3 cover lower.
HINT: Tape up the screwdriver tip before use.
4. REMOVE LOWER NO. 2 STEERING WHEEL COVER
a. Using a screwdriver, remove the steering wheel No. 2 cover lower.
HINT: Tape up the screwdriver tip before use.
5. REMOVE STEERING PAD
a. Using a "torx" socket wrench (T30), loosen the 2 "torx" screws until the groove along the screw circumference catches on the screw case.