IS 350 V6-3.5L (2GR-FSE) (2006)
-
Never dispose of a steering pad that has an undeployed airbag.
-
The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a nuisance to nearby
residents.
-
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from electrical
noise.
-
When deploying the airbag, perform the operation at least 10.m (33 ft) away from the steering pad.
-
The steering pad becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling a steering pad with a deployed airbag.
-
Do not apply water, etc. to a steering pad with a deployed airbag.
-
Always wash your hands with water after completing the operation.
1. DISPOSE OF STEERING PAD (WHEN INSTALLED IN VEHICLE)
HINT: Prepare a battery as the power source to deploy the airbag.
a. Check the function of the SST.
SST 09082-00700
CAUTION: When deploying the airbag, always use the specified SST: SRS Airbag Deployment Tool
1. Connect the SST to the battery.
Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the negative (-) terminal.
2. Check the function of the SST.
Press the SST activation switch, and check that the LED of the SST activation switch comes on.
CAUTION:
-
Do not connect the SST connector (yellow colored one) to the airbag.
-
If the LED comes on when the activation switch is not being pressed, SST malfunction is possible, so replace the SST with a new one.