IS 350 V6-3.5L (2GR-FSE) (2006)
a. Engage the 2 claws and install the steering pad switch.
b. Install the screw.
c. Engage the 2 claws and install the steering pad switch.
d. Install the screw.
e. Connect the connector to the spiral cable.
f.
Connect the cruise connector and install the connector clamp.
2. INSTALL STEERING PAD
3. INSTALL LOWER NO. 3 STEERING WHEEL COVER
4. INSTALL LOWER NO. 2 STEERING WHEEL COVER
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.
7. INSPECT SRS WARNING LIGHT