IS 350 V6-3.5L (2GR-FSE) (2006)
Seat Occupant Sensor: Service and Repair
Occupant Detection Sensor (For Manual Seat)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
2. REMOVE FRONT SEAT HEADREST ASSEMBLY
3. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER RH
a. Lift up the seat track adjusting handle and move the seat to the rear most position.
b. Using a screwdriver, detach the 2 claws and remove the front outer seat track bracket cover RH.
HINT: Tape the screwdriver tip before use.
4. REMOVE FRONT INNER SEAT TRACK BRACKET COVER RH
5. REMOVE REAR OUTER SEAT TRACK COVER RH
a. Lift up the seat track adjusting handle and move the seat to the position farthest forward.
b. Using a screwdriver, detach the 2 claws and remove the rear outer seat track cover RH.
HINT: Tape the screwdriver tip before use.
6. REMOVE REAR INNER SEAT TRACK COVER RH