IS 350 V6-3.5L (2GR-FSE) (2006)
^
Wheel alignment has been adjusted.
^
Any chassis components have been removed/installed or replaced.
Repair Procedure
1.
Disconnect the cable from the negative (-) battery terminal for MORE THAN two (2) seconds.
2.
Reconnect the cable to the negative (-) battery terminal.
3.
Perform the applicable zero point calibration of the yaw rate sensor and/or the steering angle sensor.
Refer to the applicable TSIB or Repair Manual for the zero point calibration procedure.
4.
Re-initialize all applicable systems available on the vehicle (power window sunroof power lift door etc.).