IS 350 V6-3.5L (2GR-FSE) (2006)
3. REMOVE STARTER ARMATURE PLATE
a. Remove the starter armature plate from the starter yoke
4. REMOVE STARTER COMMUTATOR END FRAME COVER
a. Using a screwdriver, remove the starter commutator end frame cover from the starter commutator end frame.
5. REMOVE STARTER ARMATURE ASSEMBLY
a. Hold the starter commutator end frame in a vise between aluminum plates.
NOTE: Do not overtighten the vise.
b. Using snap ring pliers, remove the snap ring.
c. Remove the starter armature assembly and plate washer from the commutator end frame.
NOTE: Do not drop the starter armature assembly.
6. REMOVE PLANETARY GEAR
a. Remove the 3 planetary gears from the starter drive housing.