IS 350 V6-3.5L (2GR-FSE) (2006)
e) Connect the transmission control switch connector to the floor shift assembly.
3. INSTALL SHIFT POSITION INDICATOR
a) Install the shift position indicator to the console panel upper with the 4 screws.
INSTALLATION
1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY
a) Install the floor shift assembly with the 4 bolts.
Torque: 8.3 Nm (85 kgf-cm, 73 inch lbs.)
b) Connect the 2 connectors to the floor shift assembly.
2. INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
a) Install the floor shift gear shifting rod sub-assembly with the nut.