IS 350 V6-3.5L (2GR-FSE) (2006)
c) Using SST and a press, remove the No.1 dust deflector.
SST 09950-00020
INSPECTION
1. INSPECT FLEXIBLE COUPLING
a) Check the front and rear flexible couplings for cracks or damage.
b) Inspect the flexible coupling centering bushing.
HINT: If the bushing is damaged, replace the propeller shaft assembly.
2. INSPECT PROPELLER INTERMEDIATE SHAFT
a) Using a dial indicator, check the runout of the intermediate shaft.
Maximum runout: 0.8 mm (0.031 inch)
NOTICE: The dial indicator must be set perpendicular to the center of the intermediate shaft.
HINT: If the shaft runout exceeds the maximum, replace the intermediate shaft.
3. INSPECT PROPELLER SHAFT ASSEMBLY
a) Using a dial indicator, check the runout of the propeller shaft.
Maximum runout: 0.8 mm (0.031 inch)
NOTICE: The dial indicator must be set perpendicular to the center of the propeller shaft.
HINT: If the shaft runout exceeds the maximum, replace the propeller shaft.
4. INSPECT UNIVERSAL JOINT SPIDER ASSEMBLY