IS 350 V6-3.5L (2GR-FSE) (2006)
Switch Side (Connector Front View)
a) Measure the resistance according to the value(s) in the table.
Standard Resistance
If the resistance value is not as specified, replace the park/neutral position switch assembly.
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a) Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.
b) Align the groove and the neutral alignment mark line.
c) Hold the switch in position and tighten the bolt.
Torque: 13 Nm (133 kgf-cm, 9 ft. lbs.)
d) After adjustment, perform the inspection.
INSTALLATION
1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY