IS 350 V6-3.5L (2GR-FSE) (2006)
h) Using a screwdriver, bend the tabs of the lock washer.
i)
Install the transmission control shaft lever RH with the nut.
Torque: 16 Nm (163 kgf-cm, 12 ft. lbs.)
j) Connect the park/neutral position switch connector.
2. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
3. ADJUST SHIFT LEVER POSITION
4. INSPECT SHIFT LEVER POSITION
5. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
6. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY