IS 350 V6-3.5L (2GR-FSE) (2006)
/Page-1189003.png)
If the resistance value is not as specified, replace the speed sensor.
INSTALLATION
1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2)
a) Coat a new O-ring with ATF and install it to the transmission revolution sensor.
b) Install the transmission revolution sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c) Connect the transmission revolution sensor connector.
2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)
a) Coat a new O-ring with ATF and install it to the transmission revolution sensor.
b) Install the transmission revolution sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c) Connect the transmission revolution sensor connector.
