IS 350 V6-3.5L (2GR-FSE) (2006)
Headlamp Washer Motor: Service and Repair
REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL
2. REMOVE FRONT BUMPER ASSEMBLY
3. REMOVE HEADLIGHT CLEANER WASHER NOZZLE
a. Extend the headlight cleaner washer nozzle.
b. Remove the headlight cleaner washer nozzle.
HINT: Use the same procedures for the RH side and the LH side.
4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY
a. Disconnect the headlight washer hose.
b. Remove the bolt.
c. Disengage the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.
HINT: Use the same procedures for the RH side and the LH side.
INSTALLATION