IS 350 V6-3.5L (2GR-FSE) (2006)
Wiper Motor: Service and Repair
REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL
2. REMOVE ENGINE ROOM SIDE COVER LH
3. REMOVE ENGINE ROOM SIDE COVER RH
4. REMOVE FRONT UPPER FENDER PROTECTOR LH
a. Using a clip remover, separate the clip on the rubber portion of the cowl top ventilator louver sub-assembly from the front upper fender
protector LH.
b. Disengage the 3 clips and the claw to remove the front upper fender protector LH.
5. REMOVE FRONT UPPER FENDER PROTECTOR RH
HINT: Use the same procedures for the RH side and the LH side.
6. REMOVE ROOF DRIP SIDE FINISH MOULDING LH
7. REMOVE ROOF DRIP SIDE FINISH MOULDING RH
HINT: Use the same procedures for the RH side and the LH side.
8. REMOVE FRONT WIPER ARM HEAD CAP
a. Using a screwdriver, remove the front wiper arm head cap.
HINT:
-
Use the same procedures for the RH side and the LH side.
-
Tape the screwdriver tip before use.