IS F V8-5.0L (2UR-GSE) (2008)
Remote Switch: Service and Repair
Removal
AUDIO / VIDEO: STEERING PAD SWITCH: REMOVAL
AUDIO / VIDEO: STEERING PAD SWITCH: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system
See: Restraint Systems/Air Bag Systems/Service Precautions.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
2. REMOVE LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
4. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
5. REMOVE STEERING PAD SWITCH ASSEMBLY
(a) Disconnect the cruise switch connector.
(b) Disengage the connector clamp.
(c) Disconnect the pad switch connector.
(d) Remove the screw.
(e) Disengage the 2 claws and remove the steering pad switch.
(f) Remove the screw.
(g) Disengage the 2 claws and remove the steering pad switch.