IS F V8-5.0L (2UR-GSE) (2008)
DOOR / HATCH: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: REMOVAL
DOOR / HATCH: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system
See: Restraint Systems/Air Bag Systems/Service Precautions.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
2. REMOVE FRONT DOOR SCUFF PLATE RH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
3. REMOVE FRONT DOOR OPENING TRIM COVER RH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
4. REMOVE SIDE INSTRUMENT PANEL RH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Front Passenger Side Knee Airbag Assembly/Removal
7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
8. REMOVE LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH
(a) Disengage the 2 claws and remove the luggage compartment door opener main switch.
Installation
DOOR / HATCH: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: INSTALLATION
DOOR / HATCH: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: INSTALLATION
1. INSTALL LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH
(a) Engage the 2 claws and install the luggage compartment door opener main switch.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation