IS F V8-5.0L (2UR-GSE) (2008)
4. INSTALL FRONT STABILIZER BAR
(a) Install the front stabilizer bar with the 2 nuts.
Torque: 84 Nm (857 kgf-cm, 62 ft-lbf)
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
5. INSTALL FRONT ENGINE MOUNTING INSULATOR See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
6. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine Assembly/Installation
7. INSTALL NO.2 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and
Repair/Installation
8. INSTALL NO.1 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and
Repair/Installation
9. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
10. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
11. INSTALL OIL LEVEL DIPSTICK GUIDE See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and Repair/Installation
12. INSTALL OIL LEVEL DIPSTICK
13. INSTALL ENGINE WITH TRANSMISSION ASSEMBLY
HINT: Install the engine with transmission assembly. See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation