IS F V8-5.0L (2UR-GSE) (2008)
5. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Reassembly
6. INSTALL REAR DOOR GLASS RUN See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
7. INSTALL REAR DOOR SERVICE HOLE COVER See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
8. INSTALL REAR DOOR TRIM COVER See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
9. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
10. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL See: Doors,
Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
11. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
13. INITIALIZE POWER WINDOW CONTROL SYSTEM See: Windows and Glass/Windows/Testing and Inspection/Programming and
Relearning/Initialization