IS F V8-5.0L (2UR-GSE) (2008)
Power Mirror Control Module: Service and Repair
Installation
MIRROR (EXT): OUTER MIRROR CONTROL ECU: INSTALLATION
MIRROR
1. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY
(a) Install the outer mirror control ECU assembly with the 2 screws.
(b) Connect each connector.
2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
4. INSTALL COURTESY LIGHT ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL See: Doors,
Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
7. INITIALIZE POWER WINDOW CONTROL SYSTEM See: Windows and Glass/Windows/Testing and Inspection/Programming and
Relearning/Initialization