IS F V8-5.0L (2UR-GSE) (2008)
5. REMOVE REAR DOOR SCUFF PLATE LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
6. REMOVE REAR DOOR SCUFF PLATE RH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
7. REMOVE REAR SEAT SIDE GARNISH LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
8. REMOVE REAR SEAT SIDE GARNISH RH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
9. REMOVE ROOF SIDE INNER GARNISH LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
10. REMOVE ROOF SIDE INNER GARNISH RH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
11. REMOVE CENTER STOP LIGHT SET See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Removal
12. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat
Outer Belt Assembly/Removal
13. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the connector.
(b) Remove the bolt and door control receiver.
Installation
DOOR LOCK: DOOR CONTROL RECEIVER (for Rear Side): INSTALLATION
DOOR LOCK: DOOR CONTROL RECEIVER
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the door control receiver with the bolt.
(b) Connect the connector.
2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat
Outer Belt Assembly/Installation
3. INSTALL CENTER STOP LIGHT SET See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Installation