IS F V8-5.0L (2UR-GSE) (2008)
Parking Brake Pedal: Service and Repair
Installation
PARKING BRAKE: PARKING BRAKE PEDAL: INSTALLATION
PARKING BRAKE: PARKING BRAKE PEDAL: INSTALLATION
1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY
(a) Install the parking brake control pedal assembly to the body, and temporarily tighten the 3 nuts.
(b) Fully tighten the 3 nuts in the order shown in the illustration.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(c) Connect the parking brake switch connector.
(d) Connect the instrument panel junction block assembly with the 2 nuts.
(e) Install the No. 1 parking brake cable assembly to the body with the 3 nuts and 2 bolts.
Nut - Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
Bolt - Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
2. INSTALL PARKING BRAKE EQUALIZER