IS F V8-5.0L (2UR-GSE) (2008)
/Page-718001.png)
Camshaft Bearing: Specifications
CAMSHAFT BEARING CAP (for Bank 1)
Temporarily install the 20 bolts in the sequence shown in the illustration.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
Tighten the 20 bolts in the sequence shown in the illustration.
Torque: 19 Nm (190 kgf-cm, 14 ft-lbf)
CAMSHAFT BEARING CAP (for Bank 2)
Temporarily install the 20 bolts in the sequence shown in the
illustration.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
Tighten the 20 bolts in the sequence shown in the illustration.
Torque: 19 Nm (190 kgf-cm, 14 ft-lbf)
