IS F V8-5.0L (2UR-GSE) (2008)
11. INSTALL AIR CLEANER CASE SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
12. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
13. ADD ENGINE COOLANT See: Cooling System/Coolant/Service and Repair
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
15. INSPECT FOR COOLANT LEAK See: Cooling System/Testing and Inspection
16. INSPECT FOR FUEL LEAK See: Powertrain Management/Fuel Delivery and Air Induction/Service Precautions
17. REMOVE NO. 2 ENGINE UNDER COVER
18. INSTALL REAR ENGINE UNDER COVER RH
19. INSTALL ENGINE UNDER COVER
20. INSTALL NO. 1 AIR CLEANER INLET See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
21. INSTALL ENGINE ROOM SIDE COVER RH See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
22. INSTALL ENGINE ROOM SIDE COVER LH See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
23. INSTALL COOL AIR INTAKE DUCT SEAL See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
24. INSTALL V-BANK COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation