IS F V8-5.0L (2UR-GSE) (2008)
/Page-777003.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the air cleaner assembly.
(c) Check the operation of the vacuum switching valve.
(1) When vacuum is applied to the port E, check that air is sucked into the filter.
If the result is not as specified, replace the air cleaner assembly.
(2) Apply battery voltage across the terminals. When vacuum is applied to the port F, check that air is sucked into the port E.
If the result is not as specified, replace the air cleaner assembly.
