IS F V8-5.0L (2UR-GSE) (2008)
Oil Level Sensor: Service and Repair
Removal
2UR-GSE LUBRICATION: OIL LEVEL SENSOR: REMOVAL
2UR-GSE LUBRICATION: OIL LEVEL SENSOR: REMOVAL
1. REMOVE ENGINE UNDER COVER
2. REMOVE NO. 2 ENGINE UNDER COVER
3. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR See: Steering and Suspension/Steering/Steering Gear/Service and
Repair/Removal
4. DRAIN ENGINE OIL See: Engine Lubrication/Engine Oil/Service and Repair/Replacement
5. DRAIN AUTOMATIC TRANSMISSION FLUID See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/Removal
6. DISCONNECT OIL COOLER TUBE See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Removal
7. REMOVE CRANK POSITION SENSOR BRACKET
(a) Using a clip remover, disconnect the harness clamp.
(b) Remove the bolt and crank position sensor bracket.
8. REMOVE ENGINE OIL LEVEL SENSOR
(a) Disconnect the engine oil level sensor connector.
(b) Remove the 4 bolts.