IS F V8-5.0L (2UR-GSE) (2008)
5. REMOVE CAMSHAFT TIMING CONTROL WITH EDU MOTOR RH ASSEMBLY
(a) Disconnect the 2 connectors from the camshaft timing control with EDU motor and engine wire clamp.
(b) Remove the bolt and engine wire bracket.
(c) Remove the 3 bolts and camshaft timing control motor.
(d) Remove the O-ring from the timing chain cover.
Installation
2UR-GSE ENGINE CONTROL: CAMSHAFT TIMING CONTROL MOTOR: INSTALLATION
2UR-GSE ENGINE CONTROL: CAMSHAFT TIMING CONTROL MOTOR: INSTALLATION
1. INSTALL CAMSHAFT TIMING CONTROL WITH EDU MOTOR LH ASSEMBLY