IS F V8-5.0L (2UR-GSE) (2008)
/Page-811006.png)
(d) Install the engine wire bracket with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(e) Connect the 2 connectors to the camshaft timing control with EDU motor and engine wire clamp.
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
5. INSTALL V-BANK COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
