IS F V8-5.0L (2UR-GSE) (2008)
Condenser HVAC: Service and Repair
Installation
HEATING / AIR CONDITIONING: CONDENSER: INSTALLATION
HEATING / AIR CONDITIONING: CONDENSER: INSTALLATION
1. INSTALL COOLER DRYER
(a) Using pliers, install the cooler dryer to the modulator.
(b) Sufficiently apply compressor oil to an O-ring and cap fitting surface.
Compressor oil:
ND-OIL 8 or equivalent
(c) Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.
Torque: 2.9 Nm (30 kgf-cm, 26 in-lbf)
2. INSTALL COOLER CONDENSER ASSEMBLY
(a) Install the cooler condenser assembly with the 4 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
HINT: If the condenser is replaced with a new one, add compressor oil to the new condenser.
Capacity:
40 cc (1.4 fl.oz.)
Compressor oil: