IS F V8-5.0L (2UR-GSE) (2008)
/Page-2028001.png)
Housing Assembly HVAC: Service and Repair
Disassembly
HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: DISASSEMBLY
HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: DISASSEMBLY
1. REMOVE COOL AIR BY-PASS CONTROL SERVO MOTOR
(a) Disconnect the connector.
(b) Remove the 3 screws and cool air by-pass control servo motor.
2. REMOVE AIR MIX CONTROL SERVO MOTOR
(a) Remove the 4 clamps and connector, and disconnect the wire harness.
(b) Remove the 3 screws and heater piping cover.
(c) Remove the 3 screws and air mix control servo motor.
3. REMOVE COOLER EXPANSION VALVE
