IS F V8-5.0L (2UR-GSE) (2008)
/Page-2028003.png)
(b) Remove the 4 screws and servo motor plate.
(c) Remove the 2 screws.
(d) Release the claw and remove the air outlet control servo motor from the servo motor plate.
6. REMOVE AIR MIX CONTROL SERVO MOTOR
(a) Remove the 2 screws.
(b) Release the claw and remove the air mix control servo motor from the servo motor plate.
7. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
(a) Remove the screw and clamp.
(b) Remove the heater radiator unit sub-assembly.
8. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Remove the 5 screws.
(b) Release the 3 claws and remove the air duct.
