IS F V8-5.0L (2UR-GSE) (2008)
Housing Assembly HVAC: Service and Repair
Reassembly
HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: REASSEMBLY
HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: REASSEMBLY
1. INSTALL NO. 1 COOLER THERMISTOR
(a) Install the No. 1 cooler thermistor.
NOTICE:
-
Be sure to insert the thermistor only once because reinserting it into the same position will not allow it to be firmly secured.
-
After inserting the thermistor, do not apply excessive force to the wire.
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the No. 1 cooler evaporator sub-assembly.
Compressor oil:
ND-OIL 8 or equivalent
(b) Install the 2 O-rings on the cooler evaporator sub-assembly.
(c) Install the air duct with the 3 claws and 5 screws.
3. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY