IS F V8-5.0L (2UR-GSE) (2008)
Headlamp Dimmer Switch: Service and Repair
Installation
LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSTALLATION
LIGHTING
1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
(a) Install the headlight dimmer switch assembly as shown in the illustration.
(b) Install the headlight dimmer switch assembly with the claw and the clamp.
(c) Connect the connector.
2. INSTALL TILT AND TELESCOPIC SWITCH See: Sensors and Switches/Sensors and Switches - Steering and Suspension/Sensors and Switches
- Steering/Tilt Wheel Switch/Service and Repair/Installation
3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Wiper
Switch/Service and Repair/Installation
4. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral
Cable/Service and Repair/Installation
5. INSTALL STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Installation
6. ADJUST SPIRAL CABLE See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Installation
7. INSTALL STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Installation
8. INSPECT STEERING WHEEL CENTER POINT
9. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
10. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation