IS F V8-5.0L (2UR-GSE) (2008)
License Plate Lamp: Service and Repair
Removal
LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: REMOVAL
LIGHTING
1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP
2. REMOVE LUGGAGE LOCK CONTROL CABLE PLATE See: Body and Frame/Locks/Power Locks/Power Door Lock Actuator/Service and
Repair/Luggage Compartment Door Lock/Removal
3. REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE See: Body and Frame/Locks/Power Locks/Power Door Lock
Actuator/Service and Repair/Luggage Compartment Door Lock/Removal
4. REMOVE LUGGAGE COMPARTMENT DOOR COVER
5. REMOVE LUGGAGE COMPARTMENT DOOR REINFORCEMENT
6. REMOVE LUGGAGE KEY ELECTRICAL SWITCH
7. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System) See: Accessories and Optional Equipment/Collision
Avoidance and Parking Assist Systems/Rear Vision Camera/Service and Repair/Removal
8. REMOVE REAR LIGHT ASSEMBLY LH See: Tail Lamp/Service and Repair/Rear Light Assembly/Removal
9. REMOVE REAR LIGHT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.
10. REMOVE LUGGAGE COMPARTMENT OUTSIDE DOOR GARNISH SUB-ASSEMBLY
11. REMOVE LICENSE PLATE LIGHT ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the 2 claws and remove the license plate light assembly as shown in the illustration.