IS F V8-5.0L (2UR-GSE) (2008)
(a) Connect the connector and install the rear combination light socket and wire sub-assembly.
2. INSTALL REAR TURN SIGNAL LIGHT BULB
(a) Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.
(b) Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow in the
illustration and install them as a unit.
3. INSTALL REAR COMBINATION LIGHT BODY GASKET
(a) Install a new rear combination light body gasket.
Installation
LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION
LIGHTING
1. INSTALL REAR COMBINATION LIGHT ASSEMBLY
(a) Install the rear combination light assembly with the clip and pin.
(b) Install the 3 nuts.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)