IS F V8-5.0L (2UR-GSE) (2008)
Drive Belt: Service and Repair
Removal
2UR-GSE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
2UR-GSE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE NO. 1 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. SEPARATE RADIATOR RESERVE TANK ASSEMBLY
(a) Remove the 2 bolts and separate the radiator reserve tank assembly.
4. REMOVE V-RIBBED BELT
(a) Rotate the V-ribbed belt tensioner pulley counterclockwise to loosen the V-ribbed belt tensioner.
HINT: The pulley bolt for the V-ribbed belt tensioner is reverse threaded.
(b) While turning the V-ribbed belt tensioner counterclockwise, align the holes. Insert a bar of dia5 mm (0.197 in.) into the holes to secure the
V-ribbed belt tensioner in place.
(c) Remove the V-ribbed belt.