IS F V8-5.0L (2UR-GSE) (2008)
Spark Plug: Service and Repair
Installation
2UR-GSE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION
1. INSTALL SPARK PLUG
(a) Using a 16 mm plug wrench, install the 8 spark plugs.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
2. INSTALL IGNITION COIL ASSEMBLY
(a) Install the 8 ignition coils with the 8 bolts.
NOTICE: Do not damage the ignition coils when installing them.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
(b) Connect the 8 ignition coil connectors.
3. INSTALL WIRE HARNESS CLAMP BRACKET
(a) Install the wire harness clamp bracket with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Install the wire harness clamp to the clamp bracket.