IS F V8-5.0L (2UR-GSE) (2008)
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CENTER AIRBAG SENSOR BRANCH WIRE OR CONNECTOR (CANH, CANL)
OK -- Continue to next step.
2. CHECK WIRE HARNESS (IG2, E1, E2)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY
Distance Control ECU Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Distance Control ECU Communication Stop Mode
Distance Control ECU Communication Stop Mode
DESCRIPTION