IS F V8-5.0L (2UR-GSE) (2008)
/Page-1067008.png)
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE SEAT BELT CONTROL ECU BRANCH WIRE OR CONNECTOR (CAN-H, CAN-L)
OK -- Continue to next step.
2. CHECK WIRE HARNESS (IG1, PGND)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE SEAT BELT CONTROL ECU
Short in CAN Bus Lines
NETWORKING: CAN COMMUNICATION SYSTEM: Short in CAN Bus Lines
Short in CAN Bus Lines
DESCRIPTION
The CAN bus lines are considered to be shorted when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is below 54 Ohms.
