IS F V8-5.0L (2UR-GSE) (2008)
If the result is not as specified, there may be a malfunction on the wire harness side.
11. CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
(a) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
12. CHECK FRONT CONTROLLER (ENGINE ROOM RELAY BLOCK NO. 2)
(a) Disconnect the front controller (engine room relay block No. 2) connectors.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
13. CHECK OUTER MIRROR CONTROL ECU RH
(a) Disconnect the outer mirror control ECU RH connector.