IS F V8-5.0L (2UR-GSE) (2008)
Air Flow Meter/Sensor: Service and Repair
Installation
2UR-GSE ENGINE CONTROL: MASS AIR FLOW METER: INSTALLATION
2UR-GSE ENGINE CONTROL: MASS AIR FLOW METER: INSTALLATION
1. INSTALL MASS AIR FLOW METER
(a) Install the MAF meter with the 2 screws.
Torque: 1.0 Nm (10 kgf-cm, 9 in-lbf)
NOTICE: Make sure that the O-ring is not pinched.
(b) Connect the MAF meter connector.
2. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
3. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
4. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation