IS F V8-5.0L (2UR-GSE) (2008)
2UR-GSE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL
2UR-GSE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal
2. REMOVE ENGINE AND TRANSMISSION
(a) Remove the engine and transmission See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal.
3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
(a) Disconnect the air fuel ratio sensor connector.
(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.
SST: 09224-00010
4. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
(a) Disconnect the air fuel ratio sensor connector.
(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.
SST: 09224-00010
Installation
2UR-GSE ENGINE CONTROL: AIR FUEL RATIO SENSOR: INSTALLATION
2UR-GSE ENGINE CONTROL: AIR FUEL RATIO SENSOR: INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
(a) Using SST, install the air fuel ratio sensor to the exhaust manifold LH.