IS F V8-5.0L (2UR-GSE) (2008)
2UR-GSE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: REMOVAL
2UR-GSE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH
(a) Disconnect the camshaft timing oil control valve connector.
(b) Remove the bolt and the camshaft timing oil control valve assembly.
(c) Remove the O-ring from the camshaft timing oil control valve assembly.
4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH
(a) Disconnect the camshaft timing oil control valve connector.
(b) Remove the bolt and the camshaft timing oil control valve assembly.
(c) Remove the O-ring from the camshaft timing oil control valve assembly.
Installation