IS F V8-5.0L (2UR-GSE) (2008)
/Page-1173001.png)
Canister Purge Control Valve: Testing and Inspection
2UR-GSE EMISSION CONTROL: PURGE VALVE: INSPECTION
2UR-GSE EMISSION CONTROL: PURGE VALVE: INSPECTION
1. INSPECT VACUUM SWITCHING VALVE ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the vacuum switching valve assembly.
(b) Check operation of the vacuum switching valve assembly.
(1) Check that air does not flow from port E to port F.
(2) Apply battery voltage across terminals 1 and 2.
(3) Check that air flows from port E to port F.
If the result is not as specified, replace the vacuum switching valve assembly.
