IS F V8-5.0L (2UR-GSE) (2008)
Accelerator Pedal: Service and Repair
Installation
2UR-GSE ENGINE CONTROL: ACCELERATOR PEDAL: INSTALLATION
2UR-GSE ENGINE CONTROL: ACCELERATOR PEDAL: INSTALLATION
1. INSTALL ACCELERATOR PEDAL ASSEMBLY
(a) Install the accelerator pedal with the 2 nuts.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
NOTICE: Avoid physical shocks to the accelerator pedal.
(b) Connect the accelerator pedal sensor connector.